AWH-4040 LED washwall light heatsink, IP66 LED washwall light housing.
Under-grount LED linear light, LED linear washwall light heat sink.
AWH-4040 LED wash wall light heat sink, IP66 LED washwall light casing.
Article
|
|
Aluminum profile.
Use 30mm width PCB .
Recommend 24*1W LEDs.
Wire drawing + silver anodize.
with 1 or 2 PG7 holes at back .
1.42kg / M.
|
Tempered glass cover.
W=31.8mm / T= 4mm.
93% high light transmittance.
Weight: 310g / M.
|
Silicon sealingh gasket .
Silicon material - IP65 / IP66.
Highly weather resistance.
|
End cap
Aluminum1050 material.
Sand blast + Silver anodize finish.
+ 4 M3.5 self tapping screws.
|
Adjustable Mount stand.
3mm Al1050 aluminum plate, Sand blast + Silver anodize finish.
Lower stand + Lower stand .
+ Screws.
60g / 2 set.
|
Driver box model IK220
External size: 27.5*16.8mm
Inner size: 22*15mm
Aluminum tube + 2 ABS end caps + 8 screws.
45g / set.
|
PCB: 560*25*2mm
3C5B 15 soldering pads
Thermal conductivity: 1.2W/m.k
Copper layer: 1oz
75g / Pirce |
PCB: 960*25*2mm
3C8B 24 soldering pads
Thermal conductivity: 1.2W/m.k
Copper layer: 1oz
125g / Pirce |